With 60 watts continuous and 180 watts peak power handling capability, the Polk db651 speakers are built to handle the higher power output of our Jensen deck and more.

Marine Certified Polk db Series speakers are built tough to withstand the toughest environments so they are perfect for a motorcycle.

3/4" composite Dome Tweeter with Neodymium magnet for clear, detailed highs.

Low-mass 2-Layer Kapton Voice Coil former is lightweight for high sound output without minimal weight impact on our detachable fairing. Kapton’s high melting temperature (725°F/400°C!) ensures high power handling and kick-butt reliability.

Durable Butyl Rubber Surround won’t fall apart under the stress of extreme temperatures, sunlight or time, for years of the great Polk sound.

Sensitivity: 92db. Higher sensitivity means better efficiency resulting in more loudness for a given amount of power input.

Upgrade to the MM651 model and get 100 watts continuous and 200 watts peak power handling capability, these are an ideal option for those planning on adding an amp or if you're just looking for a higher-end speaker option.

Marine Certified, just like the db651 models, and built tough to withstand the toughest environments.

Large diameter 30mm voice coil with Neodymium magnet. 1" tweeter is larger than the 3/4" on the db651 model.

Woven Glass Composite Cones with durable Butyl Rubber Surround provide superb reliability regardless of weather, and regardless of the pokes and prods of your buddies! They also feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.

Neodymium driver magnets, are about 1/10 the weight of a comparable ceramic magnet and much more powerful.

Sensitivity: 94db. Higher sensitivity means better efficiency resulting in more loudness for a given amount of power input.

Add the optional Biketronics Titan 75 watts per channel (RMS) amplifier to your fairing for the ultimate in powerful audio performance. The Titan will TRANSFORM your motorcycle audio experience with teeth-clinching, high-quality sound.

The Titan is the smallest, most powerful mobile amp in its class. “Class D” amplifier technology more efficiently transforms DC power from your battery into watts for your speakers. This high efficiency drastically minimizes loss to heat – so little that the Titan doesn’t need large cooling fins.

More expensive than a traditional large, hot automotive style amplifier, but absolutely the correct technology for a motorcycle fairing application. Very small, the Titan is designed to fit nicely inside a fairing and to run reliably there without ever overheating. And performance is stunning.

When ordered with your Dead Center Fairing the Titan is pre-installed inside the fairing on top of the stereo, below our plastic drip-guard. We use a 6-pin Deutsch DT waterproof connector providing the Titan with its own dedicated power and ground wires. The amp is wired to the stereo such that it comes on when the stereo is powered up, and is off when the stereo is off.

For the optimum in performance and longevity we recommend the Polk MM651 speaker upgrade when ordering the Biketronics Titan amp. The MM651s are rated to handle the full power of the Titan and in our testing they also produce an audibly punchier, stronger and cleaner sound.

Other features of the Titan amp:

Features Deutsch DT Series electrical connectors, as utilized by Harley-Davidson.

Connectors utilize a seal to protect electrical contacts from dirt and moisture and can be serviced as outlined by your HD service manual.

Female connector is mounted firmly on the motorcycle using a mounting clip; male connector is on a dongle coming off the fairing. No loose wires or connectors are left on your bike when the fairing is removed.

Straightforward installation - see FAQs.